PRODUCT SPOTLIGHT
Replace Your Broken Glass Scales with DSG/DMG
Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...
Many shops will be will more willing to replace a single defective scale on an existing DRO vs. replacing the entire system, if that will get them up and running. Newall's DSG and DMG ...
NEWALL NEWS
Newall Transitions to ISO 9001:2015 – Quality Management Systems
Newall Measurement Systems is pleased to announce the achievement of the ISO 9001:2015 Quality Management Systems Standard Certification. The transition to the new ISO 9001:2015 standard this June co...
Newall Measurement Systems is pleased to announce the achievement of the ISO 9001:2015 Quality Management Systems Standard Certification. The transition to the new ISO 9001:2015 standard this June co...
APPLICATION STORY
Newall Helps ESCO Achieve High Accuracy Under Harsh Conditions
Newall Measurement Systems Ltd has been supplying Esco (Switzerland), specialist manufacturer of automatic turning lathes, with their MHG-TT inductive linear encoders for over five years....
Newall Measurement Systems Ltd has been supplying Esco (Switzerland), specialist manufacturer of automatic turning lathes, with their MHG-TT inductive linear encoders for over five years....
Incremental Feedback Encoders for CNC/PLC: SHG-VP Linear Encoder
SHG-VP Linear Encoder
The SHG-VP linear encoder is intended for use with the SCC-200 module. The SCC-200 will output a ~1Vpp sine/cosine signal with a periodic reference marker.
Click here to learn more about Newall's Inductive Encoder Technology.
Download SHG-VP Linear Encoder Documents: SCC 200 Data Sheet (pdf)Installation Manual (pdf)
Dimensional Drawing <100" travel (2540mm) (pdf)
Dimensional Drawing ≥100" travel (2540mm) (pdf)
Newall Linear Encoder Catalogue (pdf)
.jpg){kind=small}
|
Specifications
|
|---|
|
Output Signal
|
~1Vpp sinusoidal from SCC-200 converter
|
|---|---|
|
Accuracy/Meter
|
±0.0004" (±10µm)
|
|
Resolution from the SCC-200
|
20µm signal period
|
|
Scale Travels
|
2" to 462" (51mm to 11.73m) — Travels over 462" available
|
|
Scale Diameter
|
0.601" (15.25mm)
|
|
Reader Head Dimensions
|
2.05"H x 5.16"L x 1.10"D (52mm x 131mm x 28mm)
|
|
Reference Marker
|
Every 0.5" (12.7mm)
|
|
Power Supply
|
5VDC ±5%, <300mA (with SCC-200)
|
|
Shock (11ms)
|
100g (IEC 69-2-6)
|
|
Vibration (55-2000Hz)
|
30g (IEC 68-2-27)
|
|
Sample Period
|
100µs
|
|
Environmental Rating
|
IP67, fully submersible (IEC 529) - Exceeds NEMA 6
|
|
Operating Temperature
|
32° to 131°F (0° to 55°C)
|
|
Coefficient of Expansion
|
12 x 10-6K
|
|
Scale Material
|
316 stainless steel
|
|
Overall Scale Length
|
Scale travel length + 10.2" (258mm)
|
|
Standard Cable
|
9 core, 0.5m (20") non-armored
|
|
Maximum Cable Length
|
72.2' (22m)
|
|
Standard Connector
|
9 pin "D" type
|
|
EMC Compliance
|
BS EN 50081-2 and BS EN 61000-6-2
|
|
Options
|
|---|
|
Resolutions
|
Custom resolutions available
|
|---|---|
|
Armored Cable
|
Available on request
|
|
Connectors
|
• Honda PCR-E20FS (Fanuc)
• IP67 (NEMA 6) • None (flying lead) |
|
Cable Lengths
|
3.5m (11.5') or 7m (22')
|
Quick and Easy Installation
The design of these linear encoders allow installment in almost any position, unlike glass-scale linear encoders, which usually need to be installed with the lip seal facing downwards to prevent contamination. Self-aligning fixing brackets allow virtually effortless scale mounting, needing only a single hole for each set of brackets.
